TOPPING PA3 Desktop HiFi Analog Digital Amplifier

Preis: 98,53 €
Auf Lager - Versand innerhalb von 48 Stunden Weltweit kostenloser Versand
  • Two-way analog inputs.Output power can reach to 80W *2
  • PA3 has over load, over heat, over voltage and low voltage protection.
  • PA3 signal link uses Hifi devices: ALPS potentiometer, EPCOS capacitance, Omron relay.
  • PA3 uses the MCU+TDA7498E project.

* Required Fields


Analog input: 2 * RCA (L + R) 
Amplifier output: banana socket, BTL output
Recommended impedance load range: 4-8Ω
Maximum output power: 80W * 2 (4Ω); 70W * 2 (8Ω)
Typical Distortion (@ 1kHz): 0.04%
Frequency response: 20Hz-20KHz
Input sensitivity: 0.6Vrms (4Ω); 0.9Vrms (8Ω)
Noise (A weight): <0.5mV
Gain: 29.3dB
Signal to noise ratio: 89dB (4Ω); 91dB (8Ω)

PA3 * 1
Power adapter * 1
Power cord * 1
User manual * 1
Warranty Card * 1

Customer Questions & Answers


Does this new amplifier sound like the Topping TP22 ?

09.06.17 11:54 Asked.

Hi Cypher,yes,but the TOPPING PA3 is the better,it has more powerful.Thank you.

Was this question helpful to you?  Yes   No

I have a pair of Q Acoustic 3010 with Polk Audio PSW110 Subwoofer does it sound good enough using Topping PA3  for small room ??  Can I connect powered subwoofer to The Topping PA3 ? How ??

27.06.17 22:41 Asked.

Hi Daniel,you can connect the PA3's banana socket.

Was this question helpful to you?  Yes   No

What is the Power-up-state, when i turn on the Mains?

27.09.17 14:51 Asked.

Hi Alex,we don't know your meaning.Please let us know more details.Thank you.

Was this question helpful to you?  Yes   No

How does this compare with SMSL SA-98E? They both use the same TDA7498E but the SMSL is rated for 160w x2 while this is only rated at 80w x2? Is that due to the 10% THD of the SMSL?    Which would be better for 150w 6Ohm floor standing speakers or are they the same?

08.12.17 00:53 Asked.

Hi Gavin,    SMSL SA-98E and PA3 both are 80w x2.  This same.    Thank you,

Was this question helpful to you?  Yes   No
  1. 1

Daily Deals